View Full Version : Who Is John Skilling?

10-21-2007, 01:28 PM
Who Is John Skilling?

Thanks to www.cooperativeresearch.org


February 27, 1993: WTC Engineer Says Building Would Survive Jumbo Jet Hitting It
In the wake of the WTC bombing, the Seattle Times interviews John Skilling who was one of the two structural engineers responsible for designing the Trade Center. Skilling recounts his people having carried out an analysis which found the Twin Towers could withstand the impact of a Boeing 707. He says, “Our analysis indicated the biggest problem would be the fact that all the fuel (from the airplane) would dump into the building. There would be a horrendous fire. A lot of people would be killed.” But, he says, “The building structure would still be there.” [Seattle Times, 2/27/1993] The analysis Skilling is referring to is likely one done in early 1964, during the design phase of the towers. A three-page white paper, dated February 3, 1964, described its findings: “The buildings have been investigated and found to be safe in an assumed collision with a large jet airliner (Boeing 707—DC 8) traveling at 600 miles per hour. Analysis indicates that such collision would result in only local damage which could not cause collapse or substantial damage to the building and would not endanger the lives and safety of occupants not in the immediate area of impact.” However, besides this paper, no documents are known detailing how this analysis was made. [Glanz and Lipton, 2004, pp. 131-132; Lew, Bukowski, and Carino, 10/2005, pp. 70-71] The other structural engineer who designed the towers, Leslie Robertson, carried out a second study later in 1964, of how the towers would handle the impact of a 707 (see Between September 3, 2001 and September 7, 2001). However, the National Institute of Standards and Technology (NIST), following its three-year investigation into the WTC collapses, will in 2005 state that it has been “unable to locate any evidence to indicate consideration of the extent of impact-induced structural damage or the size of a fire that could be created by thousands of gallons of jet fuel.” [National Institute of Standards and Technology, 9/2005, pp. 13 pdf file]